Comando Ping | Extendido Repack

Protocol [ip]: Target IP address: Repeat count [5]: Datagram size [100]: Timeout in seconds [2]: Extended commands [n]: y ← YOU MUST ANSWER 'y' HERE After answering y to , additional options appear:

The extended ping is a more advanced version of the regular ping command available on Cisco routers and switches . While a standard ping only allows you to specify the destination IP address, the extended ping lets you customize many packet parameters. comando ping extendido

| Parameter | Description | Example | |-----------|-------------|---------| | | Source IP or interface (e.g., g0/0 , 192.168.1.1 ) | 192.168.1.1 | | Type of service [0] | ToS byte value | 0 | | Set DF bit in IP header? [no] | Don't Fragment flag – test MTU | yes | | Validate reply data? [no] | Check if reply data matches | no | | Data pattern [0xABCD] | Hex pattern in payload | 0x0000 | | Loose, Strict, Record, Timestamp, Verbose[none] | IP header options | record | | Sweep range of sizes [n] | Test multiple packet sizes | y | Practical Example Scenario: Test connectivity from a specific source IP ( 192.168.1.10 ) to 8.8.8.8 with 1500-byte packets and the DF bit set. Protocol [ip]: Target IP address: Repeat count [5]: